:salams
Can anyone help?
Norton antivirus has detected a W32.spybot.worm virus in a file called C:\windows\system32\msnrgd32.exe
Now I realise that this is a dodgy file.... how it got there with all my firewall and virus crap I have no idea!
The problem is that the virus programme is denied access to the file.
Also, I cannot manually delete the file because it says the disk is either write protected or the file is in use.
Now what the heck can i do?!?!?!?!?
HEEEELLLLPPP!!
Ar-Raya
08-11-05, 07:41 AM
Walaikum Salam Wa Ramatualahi Wa Barakatu...
Those kinds of worms usually "float" around the Kazaa (and other file sharing)networks....
You say you're using Norton...Try this removal method...InshaAllah it will work.
It is kinda long...as these things are usually tricky to get rid of so u have to be thorough ...
Removal...
The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.
Disable System Restore (Windows Me/XP).
Update the virus definitions.
Run a full system scan, and delete all files detected.
Delete the value that was added to the registry.
Delete any zero-byte files in the Startup folder.
Reenable the SharedAccess service (Windows 2000/XP only)
For specific details on each of these steps, read the following instructions.
1. To disable System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.
Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.
Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.
For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:
How to disable or enable Windows Me System Restore (http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001012513122239?OpenDocument&src=sec_doc_nam)
How to turn off or turn on Windows XP System Restore (http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001111912274039?OpenDocument&src=sec_doc_nam)
Note: When you are completely finished with the removal procedure and are satisfied that the threat has been removed, reenable System Restore by following the instructions in the aforementioned documents.
For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article: Antivirus Tools Cannot Clean Infected Files in the _Restore Folder (http://support.microsoft.com/support/kb/articles/Q263/4/55.ASP) (Article ID: Q263455).
2. To update the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:
Running LiveUpdate, which is the easiest way to obtain virus definitions: These virus definitions are posted to the LiveUpdate servers once each week (usually on Wednesdays), unless there is a major virus outbreak. To determine whether definitions for this threat are available by LiveUpdate, refer to Virus Definitions (LiveUpdate) (http://securityresponse.symantec.com/avcenter/venc/data/w32.spybot.worm.html#protection).
Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted daily. You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to Virus Definitions (Intelligent Updater) (http://securityresponse.symantec.com/avcenter/venc/data/w32.spybot.worm.html#protection).
The latest Intelligent Updater virus definitions can be obtained here: Intelligent Updater virus definitions (http://securityresponse.symantec.com/avcenter/defs.download.html). For detailed instructions read the document: How to update virus definition files using the Intelligent Updater (http://service1.symantec.com/SUPPORT/nav.nsf/docid/1998082013035306?OpenDocument&src=sec_doc_nam).
3. To scan for and delete the infected files
Start your Symantec antivirus program and make sure that it is configured to scan all the files.
For Norton AntiVirus consumer products: Read the document: How to configure Norton AntiVirus to scan all files (http://service1.symantec.com/SUPPORT/nav.nsf/docid/1999110513272906?OpenDocument&src=sec_doc_nam).
For Symantec AntiVirus Enterprise products: Read the document: How to verify that a Symantec Corporate antivirus product is set to scan all files (http://service1.symantec.com/SUPPORT/ent-security.nsf/docid/2002052213125148?OpenDocument&src=sec_doc_nam).
Run a full system scan.
Note any files detected, click Delete.
Important: If you are unable to start your Symantec antivirus product or the product reports that it cannot delete a detected file, you may need to stop the risk from running in order to remove it. To do this, run the scan in Safe mode. For instructions, read the document, How to start the computer in Safe Mode (http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/2001052409420406?OpenDocument&src=sec_doc_nam). Once you have restarted in Safe mode, run the scan again.
After the files are deleted, restart the computer in Normal mode and proceed with the next section.
Warning messages may be displayed when the computer is restarted, since the threat may not be fully removed at this point. You can ignore these messages and click OK. These messages will not appear when the computer is restarted after the removal instructions have been fully completed. The messages displayed may be similar to the following:
Title: [FILE PATH]
Message body: Windows cannot find [FILE NAME]. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
4. To delete the value from the registry
Important:Symantec strongly recommends that you back up the registry before making any changes to it. Incorrect changes to the registry can result in permanent data loss or corrupted files. Modify the specified subkeys only. For instructions refer to the document: How to make a backup of the Windows registry. (http://service1.symantec.com/SUPPORT/tsgeninfo.nsf/docid/199762382617?OpenDocument&src=sec_doc_nam)
Click Start > Run.
Type regedit
Click OK.
Note: If the registry editor fails to open the threat may have modified the registry to prevent access to the registry editor. Security Response has developed a tool (http://securityresponse.symantec.com/avcenter/venc/data/tool.to.reset.shellopencommand.registry.keys.html) to resolve this problem. Download and run this tool (http://securityresponse.symantec.com/avcenter/venc/data/tool.to.reset.shellopencommand.registry.keys.html) , and then continue with the removal.
Click OK.
In the Registry Editor, navigate to the following subkeys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\Run
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\
RunOnce
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\
RunServices
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Curre ntVersion\Run
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\
RunServices
HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\
RunOnce
HKEY_CURRENT_USER\Software\Microsoft\OLE
In the right pane, delete any values that refer to the file names that were detected.
Navigate to the subkeys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\SharedAccess
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\wscsvc
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\TlntSvr
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\RemoteRegistry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Messenger
In the right pane, reset the original value, if known:
"Start" = "4"
Navigate to the subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Lsa
In the right pane, reset the original value, if known:
"restrictanonymous" = "1"
Navigate to the subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanserver\
parameters
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\lanmanworkstation\
parameters
In the right pane, reset the original values, if known:
"AutoShareWks" = "0"
"AutoShareServer" = "0"
Navigate to the subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win dows\WindowsUpdate
In the right pane, reset the original value, if known:
"DoNotAllowXPSP2" = "1"
Navigate to the subkey:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OLE
In the right pane, reset the original value, if known:
"EnableDCOM" = "N"
Navigate to and delete the following subkeys, if present:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\BoolTern
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\R oot\LEGACY_BOOLTERN
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Servic es\rdriv
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\R oot\LEGACY_RDRIV
Exit the Registry Editor.
5. To delete the zero-byte files from the Startup folder
Follow the instructions for your version of Windows:
Note: There may be legitimate files on your system that start with "tftp." Delete only the zero-byte files from the Startup folder.
To delete zero-byte files in Windows 95/98/Me/NT/2000
On the Windows taskbar, click Start > Find (or b) > Files or Folders.
Make sure that "Look in" is set to (C:) and that "Include subfolders" is checked.
In the "Named" or "Search for..." box, type, or copy and paste, the following file name:
tftp*.*
Click Find Now or Search Now.
Delete the files that are zero bytes in size and contained within any folder whose name ends with "Startup."
To delete zero-byte files in Windows XP
On the Windows taskbar, click Start > Search.
Click All files and folders.
In the "All or part of the file name" box, type, or copy and paste, the following file name:
tftp*.*
Make sure that "Look in" is set to "Local Hard Drives" or to (C:).
Click More advanced options.
Check Search system folders.
Check Search subfolders.
Click Search.
Delete the files that are zero-bytes in size and contained within any folder whose name ends with "Startup."
6. To reenable the SharedAccess service (Windows 2000/XP only)
The SharedAccess service is responsible for maintaining Internet Connection Sharing and the Windows Firewall/Internet Connection Firewall applications in Windows. (The presence and names of these applications vary depending on the operating system and service pack you are using.) To protect your computer and maintain network functionality, re-enable this service if you are using any of these programs.
Windows XP Service Pack 2
If you are running Windows XP with Service Pack 2 and are using the Windows Firewall, the operating system will alert you when the SharedAccess service is stopped, by displaying an alert balloon saying that your Firewall status is unknown. Perform the following steps to ensure that the Windows Firewall is re-enabled:
Click Start > Control Panel.
Double-click the Security Center.
Ensure that the Firewall security essential is marked ON.
Note: If the Firewall security essential is marked on, your Windows Firewall is on and you do not need to continue with these steps.
If the Firewall security essential is not marked on, click the "Recommendations" button.
Under "Recommendations," click Enable Now. A window appears telling you that the Windows Firewall was successfully turned on.
Click Close, and then click OK.
Close the Security Center.
Windows 2000 or Windows XP Service Pack 1 or earlier
Complete the following steps to re-enable the SharedAccess service:
Click Start > Run.
Type services.msc
Then click OK.
Do one of the following:
Windows 2000: Under the Name column, locate the "Internet Connection Sharing (ICS)" service and double-click it.
Windows XP: Under the Named column, locate the "Internet Connection Firewall (ICF) / Internet Connection Sharing (ICS)" service and double-click it.
Under "Startup Type:", select "Automatic" from the drop-down menu.
Under "Service Status:", click the Start button.
Once the service has completed starting, click OK.
Close the Services window.
Salams
or alternatively login to Safe mode locate the file and delete it
or login to safe mode with command prompt depends on what OS u using :D
Thanks bro!
I've tried the first stuff you posted up - problem is that I cannot delete the file.... it won't let me - it says that either the disc is write protected or that the file is in use....
so how do i do the other thing you mentioned about log in to safe mode?
alternatively - should I try and delete the file from DOS or something [is there still such a thing??]??
muslim warrior
08-11-05, 04:27 PM
Thanks bro!
I've tried the first stuff you posted up - problem is that I cannot delete the file.... it won't let me - it says that either the disc is write protected or that the file is in use....
so how do i do the other thing you mentioned about log in to safe mode?
alternatively - should I try and delete the file from DOS or something [is there still such a thing??]??i fink u can log into safe mode when u start up ur PC.
on mine when u start up u have a cuple of secs to press F8 or sumfin like dat den u can log into safe mode
Thanks bro!
I've tried the first stuff you posted up - problem is that I cannot delete the file.... it won't let me - it says that either the disc is write protected or that the file is in use....
so how do i do the other thing you mentioned about log in to safe mode?
alternatively - should I try and delete the file from DOS or something [is there still such a thing??]??
Try Run Spyware buster program like Adaware and Spybot seeifthat works first
okay bros... I'm on to step 4 = i managed to startup in safe mode and finally delete the busted file - now i'm goona do this regedit thing [nervous!]
watha heck?!
that step 4 is ridiculously difficult ... am goona see if I can get away w/out doing it for now
vBulletin® v3.7.2, Copyright ©2000-2008, Jelsoft Enterprises Ltd.